Backup Programming-Manual (#124) - Avaya PARTNER Advanced Communications System Installation And Use Manual

®
PARTNER Advanced Communications System Installation, Programming, and Use
Backup Programming—Manual (#124)
Use this feature to manually back up all the programming (except the system date, day, and time)
to a Backup/Restore PC Card.
Programming
To begin a manual backup of system settings:
1. Verify that only one Backup/Restore Card is in the processor module.
f00ss#124
2. Press
If there is a problem, one of the following messages appears (see
"Troubleshooting"
Card is Write Protected
Insert Valid Card
SystemBusy
If there is no problem, the display instructs you to press Enter to begin the backup.
e
3. Press .
A status message is displayed indicating that a backup is in progress, and within 30 seconds,
a message appears indicating the result.
If the backup was successful, the new backup information replaces the information in the old
MAN.mmddyy file on the Backup/Restore PC Card, and the mmddyy extension now reflects
the current date. Backup information created during a manual backup does not overwrite any
AUTO.mmddyy file.
If the backup failed, you see one of the following error messages (see
"Troubleshooting"
Backup Failed:Check Card
Backup Failed:SystemBusy
4. Exit programming mode.
If you exit the procedure before the backup finishes, you do not interrupt the backup,
but you do not see feedback messages on the display.
Backup and Restore
4-6
for explanations and corrective actions):
for explanations and corrective actions):
4
4
at extension 10 or 11.
Chapter 11,
Chapter 11,