Avaya PARTNER Advanced Communications System Installation And Use Manual page 120

®
PARTNER Advanced Communications System Installation, Programming, and Use
The entries you must make to permit or restrict toll calls differ depending on the setting for Toll
Call Prefix (#402).
If Star Code Dial Delay (#410) is active, after a valid star code is dialed, the system resets the
dialing restrictions to check the number beginning with the first digit after the star code.
If you want to go to another programming procedure when entering telephone numbers in a
list, you must press
considered part of the telephone number.
Programming
To create a list of Disallowed Phone Numbers:
f00ss#404
1. Press
2. At the List Number : prompt, enter a list number (1–8).
3. At the Entry: prompt, select a list entry (01–10).
4. At the Data - - - - - - - - - - - - prompt, enter the first telephone number.
5. To save the telephone number in memory, press
6. Do one of the following:
To add other telephone numbers to this list, press
and repeat Steps 4 and 5.
To change the telephone number you just entered, press
and 5.
To delete the telephone number you just entered, press
To create another list, press
7. Select another procedure, or exit programming mode.
Dialing Restrictions and Permissions
4-22
N P
+
N
#
, since entering and a three-digit code is
4
at extension 10 or 11.
e
.
n
to select a different list entry
r
r
.
P
+ and repeat from Step 2.
and repeat Steps 4