Remote Administration Password (#730) -Release 3.0 Or Later; Remote Administration Password (#730); Release 3.0 Or Later; Considerations - Avaya PARTNER Advanced Communications System Installation And Use Manual

®
PARTNER Advanced Communications System Installation, Programming, and Use

Remote Administration Password (#730)

—Release 3.0 or Later

Use this feature to create a password for remote or local PC administration of the system (except
for the Hong Kong Release 3.0 version). To perform remote administration, the remote party must
have the password created by the System Administrator.
This feature prevents unauthorized use of the remote administration capability.

Considerations

This feature can be used only from a system telephone.
The password can be changed only locally at Extension 10 or 11. It cannot be changed at the
PC.
You must enter a password before you can use remote administration.
Only one administration tool can be active at a time. If remote administration is active, local
administration is blocked. If local administration is active, and you start a remote session, the
local session drops.

Programming

To program a password:
1. At extension 10 or 11, press
Password prompt appears.
REMOTE PASSWORD
DATA - - - - - - - - - - - -
Dashes appear if there is no current password. If there is a password, it appears in place of
the dashes.
2. Enter or change the password by entering the two-digit character codes found in
page 5-4. The password can contain up to eight alphanumeric characters.
3. To save the password, press
has been entered.
4. To remove an existing password, repeat steps 1 and 2, and press
5. Select another procedure, or exit programming mode.
Remote Administration Password (#730) —Release 3.0 or Later
4-56
f00ss#730
e
. The bottom line of the display shows the password as it
4
4
4
. The Remote
r
.
Table 5-1 on