Avaya PARTNER Advanced Communications System Installation And Use Manual page 66

®
PARTNER Advanced Communications System Installation, Programming, and Use
Desk-Mounting the Telephone
Follow these steps to desk-mount a telephone:
1. Gently place the telephone upside down.
2. Route the telephone cord through the hole in
the top center of the stand (see
3. Insert the tabs on the narrow end of the stand
into the slots on the inside bottom edge of the
telephone (see
Installing Telephones
2-34
Figure
Figure 2-27).
2
2-26).
Figure 2-26. Routing the Telephone
Cord
Figure 2-27. Inserting the Tabs