Priv." Is Displayed Instead Of Caller Id Information; Is Displayed Instead Of Caller Id Information; Some Caller Id Information Does Not Display; Intercom Autodialer Does Not Work Properly - Avaya PARTNER Advanced Communications System Installation And Use Manual

Advanced communications system
Hide thumbs Also See for PARTNER Advanced Communications System:
Table of Contents

Advertisement

®
PARTNER
Advanced Communications System Installation, Programming, and Use

"Priv." Is Displayed Instead of Caller ID Information

Possible Cause: The caller used a star code, *67, to block Caller ID information or has instructed
the telephone company to block Caller ID information.
What to do: Nothing; this is the normal operation for these conditions.
"- - - - - - - - - - - -" Is Displayed Instead of Caller ID
Information
Possible Cause: The call originated outside the area for which the telephone company can provide
Caller ID information.
What to do: Nothing; this is normal operation for the Caller ID service.

Some Caller ID Information Does Not Display

Possible Cause: Not all calls on Caller ID lines are displayed. This varies by local telephone
company.
What to do: If Caller ID information for a large number of calls is not displayed, contact your local
telephone company.

Intercom Autodialer Does Not Work Properly

Possible Cause 1: Telephone cord is plugged into wrong jack on bottom of Intercom Autodialer.
What to do: Plug the modular telephone cord into the correct jack—see
CA48 Intercom Autodialer" on page 2-39
If the Intercom Autodialer works properly, the problem is solved.
If the problem remains, go to Possible Cause 2.
Possible Cause 2: Intercom Autodialer is not receiving auxiliary power.
What to do: Make sure the Intercom Autodialer is plugged into an electrical outlet.
If the Intercom Autodialer works properly, the problem is solved.
If the problem remains, go to Possible Cause 3.
Possible Cause 3: The cord is defective.
What to do: Unplug the cord from the base of the Intercom Autodialer and the wall jack. Replace
the cord with a cord that you know works.
If the Intercom Autodialer works, the cord is faulty. Call the helpline number listed on the front,
inside cover to arrange for a replacement.
If the problem remains, go to Possible Cause 4.
System Telephone Problems
11-8
1 1
1 1
1 1
1 1
for instructions.
"Connecting a PARTNER-

Advertisement

Table of Contents
loading

This manual is also suitable for:

Partner acs

Table of Contents