®
PARTNER
Advanced Communications System Installation, Programming, and Use
Upgrading T1 Module Firmware
PARTNER ACS Release 6.0 or later provides a firmware upgrade capability for the T1 module,
which is equipped with programmable flash memory. The firmware to upgrade this module resides
on a PC Card. This PC Card contains the T1 module firmware upgrade software only. It does not
contain the system software.
The steps to perform a firmware upgrade are the same as those to upgrade the system software.
See
"Using a PC Card" on page
Once a successful firmware upgrade as been completed, all power LEDs are steady green.
Upgrading T1 Module Firmware
10-6
10-2.
1 0