Display - Avaya PARTNER Advanced Communications System Installation And Use Manual

®
PARTNER Advanced Communications System Installation, Programming, and Use
Table 1-6. Line/Extension Modules—Continued
Name Line Jacks
362EC
(Endeavor
module)
400E
400EC
308EC
Expansion
Module
1600 DSL
Module
T1 Module
1 To receive Caller ID information, you must first subscribe to the service from your local telephone company (if
available) on a per-line basis. Then connect those lines associated with Caller ID to the line jacks on the module. Any
users with system display telephones who receive calls on Caller ID lines will get Caller ID information.
Hereafter, references to 206 modules include 206E, 206EC, and all 206 modules used with
previous releases of the PARTNER product line. Similarly, references to 400 modules include
400E, 400EC, and all 400 modules used with previous releases of the PARTNER product line. Any
200 modules can be used.
System Components
1-14
Extension Jacks
3 8
4 0
4 0
3 8
1 0
1 0
Additional Information
Supported in Release 5.0 or later systems.
Provides 6 ETR and 2 T/R extension
jacks.You can connect PARTNER
Endeavor telephones and other devices
(such as fax machines and modems) to the
extension jacks.
No longer available for ordering
Green power indicator
No longer available for ordering
Green power indicator
1
Supports Caller ID
Supported in Release 2.0 or later systems.
You can connect telephones and other
devices (such as fax machines and
modems) to the extension jacks.
Green power indicator
1
Supports Caller ID
Supported in Release 4.0 or later systems.
Although the 1600 DSL module has only
one line jack, it supports up to 16 lines.
Green power indicator
Two touch-tone receivers
1
Supports Caller ID
Supported in Release 6.0 or later systems.
Although the T1 module has only one line
jack, it supports up to 16 lines.
Green power indicator
Eight touch-tone receivers
Supports Direct Inward Dialing (DID)
service