Avaya PARTNER Advanced Communications System Installation And Use Manual page 375

Figure 10-4. Removing the Plastic Protector
5. Before you insert the new module, make sure that all 400 (or 200) modules are installed to the
right of all 012E, 308EC, or 206 modules. If you have a T1 module or a 1600 DSL module, it
must be in the first slot on the left of the carrier (see
module to accommodate the new one, see
PARTNER ACS Release 5.0 and later supports Endeavor telephones when an
Endeavor 362EC module is installed in the carrier. Install the Endeavor 362EC
module(s) to the right of the T1 module (if installed) or 1600 DSL module (if installed),
and to the left of any 400 and 200 module.
Figure 10-5. Placement of Modules
Tab
Tab
Figure
"Replacing Modules" on page
PFT L
I
N
E
S
PFT
E
X
T
E
N
S
I
O
N
S
Upgrading the System
10-5). If you need to move a
10-11.
Adding New Modules
10-9