Avaya PARTNER Advanced Communications System Installation And Use Manual page 126

®
PARTNER Advanced Communications System Installation, Programming, and Use
Group Call Distribution (#206) is disabled on T1 lines with Direct Inward Dialing (DID). DID
calls are routed to hunt groups and calling groups via the DID Mapping Table. (See the
PARTNER ACS R6.0 PC Administration online help for more information.)
Hands Free Answer On Intercom (HFAI) is disabled on T1 lines with Direct Inward Dialing
(DID).
Line Coverage Extension (#208) is disabled on T1 lines with Direct Inward Dialing (DID).
DID calls will go to the DID destination coverage.
Incoming calls on T1 lines with Direct Inward Dialing (DID) will ring immediately at the
specified extension. The Line Ringing options and Pool Ringing options are ignored.
Pool Access Restriction (#315) is disabled for incoming calls on a T1 line with Direct Inward
Dialing (DID). To prevent DID calls from ringing at an extension, do not include that extension
in the DID Mapping Table.
Line Access Restriction (#302) is disabled for incoming calls on a T1 line with Direct Inward
Dialing (DID). To prevent DID calls from ringing at an extension, do not include that extension
in the DID Mapping Table.
You can assign (map) a DID line to a calling group.
Night Service features are disabled for incoming calls on a T1 line with Direct Inward Dialing
(DID). During Night Service, DID calls will ring only at the DID destination and will follow the
coverage for that destination (if active).
Recall is disabled on T1 lines with Direct Inward Dialing (DID).
Call records for incoming calls on T1 lines with Direct Inward Dialing (DID) will be reported
when SMDR Record Type (#608) is set to 1=All Calls.
For incoming calls on T1 lines, the Number field on call reports for Station Message Detail
Recording (SMDR) does not display telephone numbers. The Number field displays "IN" for
incoming calls on T1 lines.
You must use the PARTNER ACS R6.0 PC Administration software to program Unique Line
Ringing (#209) for T1 lines with Direct Inward Dialing (DID).
VMS Hunt Delay (#506) and VMS Hunt Delay (#507) are disabled on T1 lines with Direct
Inward Dialing (DID).
You can assign a T1 line with DID to a Calling Group. However, you cannot assign a
coverage path for a calling group that has T1 lines with Direct Inward Dialing (DID).
If you use T1 lines with Direct Inward Dialing (DID) that are not administered for Direct
Inward Dialing (DID) in PARTNER ACS R6.0 PC Administration, set Automatic System
Answer Delay (#110) to 1 ring or more.
If you use T1 lines with Direct Inward Dialing (DID) that are not administered for Direct
Inward Dialing (DID) in PARTNER ACS R6.0 PC Administration, set Direct Extension Dial
Delay (#112) to 1 ring or more.
If you are using Fax CNG Detection (#505, Group 8) on a T1 line with Direct Inward Dialing
(DID), set your fax machine to answer in less than four rings.
Direct Inward Dialing (DID)— Release 6.0 and Later
4-28