Extension Name Display; Using Exclusive Hold - Avaya PARTNER Advanced Communications System Installation And Use Manual

®
PARTNER Advanced Communications System Installation, Programming, and Use
Programming
To program an Exclusive Hold button:
f00
1. Press
2. Press a programmable button.
f02
3. Press
4. Program another button for this extension, or exit programming mode.

Using Exclusive Hold

While active on an outside call on a system telephone:
1. Press the programmed button or
The green light next to the line, pool, or
appears busy (steady red).
2. To retrieve the call, press the line, pool, or
handset or press
You can pick up a call on Exclusive Hold only at the extension at which it was put on
Exclusive Hold.

Extension Name Display

You can assign a name to your extension: up to 20 characters long on PARTNER telephones, or
up to 12 characters long on MLS telephones. When that extension is used to make an intercom,
group, or transferred call, the name appears on the system display telephone receiving the call.
Similarly, users receiving a transfer return call see the name of the person assigned to the
extension that did not answer the transferred call.
The System Administrator usually programs names for the extensions in the system. However, as
the individual user, you can change the name from your telephone. See
on page 5-4 for more details.

Extension Name Display

8-38
.
.
f02
i
S
.
8
8
to put the call on Exclusive Hold.
button flutters. At all other extensions, the line
i
button on which the call is held, and lift the
8
"Extension Name Display"