Avaya PARTNER Advanced Communications System Installation And Use Manual page 149

Considerations
For extension 10 and any extensions for which Line Access Mode (#313) is set to Key, this
feature is automatically set to No Access.
When a user has access to a pool for outgoing calls, you can customize dialing restrictions for
the user's extension by using Outgoing Call Restriction (#401) and Disallowed Phone
Number Lists (#404).
To restrict a pooled extension from receiving and/or making calls on individual lines, you must
use Line Access Restriction (#302).
Caller ID information does not appear for ringing calls on lines belonging to a pool
programmed for Out Only or for No Access.
Programming
To restrict an extension from making or receiving calls on all the lines in a specific pool:
f00ss#315
1. Press
2. Enter the number of the extension to be programmed. A display similar to the following
appears:
Pool Access Rstr 23
Pool:
3. Enter the pool number (880, 881, 882, or 883) to be restricted at this extension. The current
restriction is displayed.
D
4. Press until the appropriate value appears:
1 = No Restriction (calls permitted on all lines in that pool; the factory setting) 
2 = Out Only (can only make outside calls, not receive them, on lines in that pool)
3 = In Only (can only receive calls, not make them, on lines in that pool)
4 = No Access (cannot receive or make calls, but can receive transferred calls on lines in
that pool)
5. Do one of the following:
To restrict another pool at this extension, press
shows on the display. Then repeat Step 4.
To restrict another extension, press
6. Select another procedure, or exit programming mode.
4
4
.
n
or
N P
or
Programming System Options
p
until the pool number
and begin at Step 2.
Pool Programming
4-51