Programming; Using Account Code Entry - Avaya PARTNER Advanced Communications System Installation And Use Manual

Use Forced Account Code Entry (#307) to identify system telephone extensions that are
required to enter an account code prior to dialing any outside number (including those on the
Emergency Phone Number List). A forced account code must be entered at the beginning of
a call; however, a different account code can be entered any time during the call.
With Release 3.0 or later, users can make 911 calls from the Forced Account Code
extensions without entering the account code as long as 911 has been entered into
the Emergency Phone Number List (#406).
You can use Forced Account Code List (#409) to create a list of valid account codes, which
should be distributed to the appropriate users. If a Forced Account Code List exists, the
system checks the list whenever a user enters a forced account code. If the code is valid, the
system provides the user access to an outside line. If the code is invalid, the system denies
the user access to an outside line.
For faster entry of frequently used account codes, you can program an account code on an
Auto Dial button or as a System or Personal Speed Dial number (but not as a Marked
System Speed Dial number). See
4-63, and "Personal Speed Dial" on page 8-63

Programming

To program an Account Code Entry button:
f00
1. Press
2. Press a programmable button, preferably one with lights.
f12
3. Press
4. Program another button for this extension, or exit programming mode.

Using Account Code Entry

To enter or change an optional account code:
1. From a system telephone, if a password is programmed for the system, enter it before lifting
the handset.
2. After lifting the handset (or while already active on an outside call), press the programmed
Account Code Entry button, or press
If the Account Code Entry button has lights, the green light turns on.
3. Enter an account code by doing one of the following:
Dial the account code manually by using the telephone's dialpad.
Dial a System or Personal Speed Dial number programmed with the account code.
Press an Auto Dial button programmed with the account code.
"Auto Dialing" on page
.
.
f12
Programming & Using Telephone Features
8-5, "System Speed Dial" on page
for programming instructions.
8
8
.
Account Code Entry (F12)
8-3