Avaya PARTNER Advanced Communications System Installation And Use Manual page 260

®
PARTNER Advanced Communications System Installation, Programming, and Use
When a call is answered, it is not logged unless the system has been programmed to log
answered calls by using Caller ID Log Answered Calls, or an extension is programmed to
answer all calls by using Caller ID Log Line Assignment and Caller ID Log All Calls.
Programming
To program a Call Log Display button:
f00
1. Press
2. Press a programmable button with lights.
f23
3. Press
4. Program another button for this extension, or exit programming mode.
Using the Caller ID Logging and Dialing Feature
When Caller ID information is logged for your extension and you have programmed a Call Log
button, the word Calls is displayed, as shown in
version, the dialed digits will display slightly differently than shown in the illustrations in this
document.)
0 2 /
10:53 a m
Figure 8-1. System Telephone Display Showing Logged Calls
To view the log:
1. Press your preprogrammed Call Log button.
The green light flutters and the Call Log is activated. One of several messages appears.
2. Press the More button repeatedly until you see the Telephone Number Display (shown in
Figure 8-2).
Caller ID Features
8-22
.
.
2 6 W e d
8
8
Figure 8-1. (For the Hong Kong Release 3.0
C a l l s