Avaya PARTNER Advanced Communications System Installation And Use Manual page 196

®
PARTNER Advanced Communications System Installation, Programming, and Use
2. Dial the telephone number.
On a system display telephone, the dialed number appears on the display.
If you are using a PBX or Centrex line, you also may need to use a dial-out code (usually 9)
before you dial a number outside the system.
To make an outside call on a specific line:
1. Press the idle line button (red and green lights are both off), or dial
digit line number.
2. If desired, lift the handset.
3. Dial the telephone number.
To make an outside call using a specific pool:
1. Press the idle pool button (red and green lights are both off), or dial
pool access code (880, 881, 882, or 883).
2. If desired, lift the handset.
3. Dial the telephone number.
To reserve a busy line or pool so your telephone beeps when the line or pool becomes free (useful
when you share a line, such as a WATS line, with other people):
1. Press the busy line or pool button (red light is on steady) without lifting the handset or pressing
S
.
2. When the line is free and your telephone beeps, lift the handset and dial the number.
If more than one person reserves a line, all their telephones beep when the line is
free. The first person to pick up the telephone after the beep gets the line, and the
other reservations are canceled.
Making an Outside Call on a Single-Line Telephone
To make an outside call on a single-line telephone:
1. Lift the handset.
You hear intercom dial tone.
9
2. Dial to get an outside line.
You hear outside line dial tone.
3. Dial the telephone number. (If you are using a PBX or Centrex line, you also may need to use
a dial-out code, usually
To make an outside call on a specific line:
1. Lift the handset.
You hear intercom dial tone.
Handling Calls
6-18
9
, before you dial a number outside the PBX or Centrex system.)
i8
plus the two-
i
plus the three-digit
6