Programming; Using The Outgoing Call Restriction Button - Avaya PARTNER Advanced Communications System Installation And Use Manual

Programming

To program an Outgoing Call Restriction Button at extension 10:
f00ss#114
1. Press
2. Do one of the following:
If you want to assign Outgoing Call Restriction to the first available button, press
D
until a display similar to the following appears:
Outgoing CallRstr Button
1 Assigned - Ext10
If you want to remove the Outgoing Call Restriction Button assignment, press
until a display similar to the following appears:
Outgoing CallRstr Button
2 Not Assigned (the factory setting) 
If you want to assign Outgoing Call Restriction to a specific button, press
similar to the following appears:
Outgoing CallRstr Button
3 Select a Button
Then press a programmable button with lights to assign Outgoing Call Restriction to that
button.
3. Select another procedure, or exit programming mode.
4. Label the Outgoing Call Restriction Button at extension 10.

Using the Outgoing Call Restriction Button

To change an extension's Outgoing Call Restriction setting:
1. Press the Outgoing Call Restriction Button at extension 10.
The green light next to the Outgoing Call Restriction Button turns on, and extension 10
appears busy to the system.
2. Press the Auto Dial button for the desired extension repeatedly until its lights show the correct
setting as follows:
No Restriction. The green light next to the Auto Dial button is on steady.
Inside Only. The red light next to the Auto Dial button is on steady.
Local Only. The green light next to the Auto Dial button flashes.
3. Press the Outgoing Call Restriction Button at extension 10, or lift the handset and replace it
back in the cradle.
The green light next to the Outgoing Call Restriction Button goes off, and extension 10
resumes normal operation.
Operator Features
7
at extension 10.
7
Outgoing Call Restriction Button (#114)
D
3
. A display
7-19