®
PARTNER
Advanced Communications System Installation, Programming, and Use
Programming For Release 2.0 or Earlier Systems
To change the VMS Hunt Schedule setting for the voice messaging system's Automated
Attendant Service:
f00ss#507
1. Press
D
2. Press
1 = Always (the factory setting)
2 = Day Only
3 = Night Only
3. Select another procedure, or exit programming mode.
Programming For Release 3.0 or Later
To change the VMS Hunt Schedule setting for the voice messaging system's Automated
Attendant Service:
f00ss#507
1. Press
2. Enter the line number.
The current setting is displayed.
D
3. Press
1 = Always (the factory setting)
2 = Day Only
3 = Night Only
4. To set VMS Hunt Schedule for another line, press
appears on the display. Then repeat Step 3.
5. Select another procedure, or exit programming mode.
Voice Messaging Systems
9-48
until the appropriate value appears:
until the appropriate value appears:
at extension 10 or 11.
at extension 10 or 11.
n
p
or
until the line number
9