Multiline Hunt Group Feature Translations - Lucent Technologies MERLIN LEGEND Release 7.0 System Planning Manual

MERLIN LEGEND Communications System Release 7.0
System Planning 555-670-112
H NI-1 BRI Provisioning
Northern Telecom DMS-100 Switch Translations
SPID_SUFFIX < enter spid suffix value >
PVC
VERSION
ISSUE
Associate new DN with LTID using the NEW command:
SONUMBER
DN
LCC
GROUP
SUBGRP
NCOS
SNPA
KEY
RINGING
LATANAME
LTG
LEN_OR_LTID
DMS-100 normally delivers the Calling Party Number and the Redirecting
Number, if available.
Attach LTIDs to LEN using the SLT command:
SONUMBER
LTID
FUNCTION
LEN

Multiline Hunt Group Feature Translations

The sample screens shown below illustrate the translations for alternate voice and
data hunting on three Digital Subscriber Lines (DSLs) and six Directory Numbers
(DNs) forming a circular hunt group. This hunting is provided using the Multiline
Hunt Group feature.
The screens shown in this section are examples, DNs shown on these screens
should be replaced with applicable data.
QDN 2257141
option
<FUNCTIONAL>
<2>
<<cr> or $>
< enter DN >
<ISDNKSET>
< enter group name >
< enter subgrp value >
< enter ncos value >
< enter NXX value >
<1>
<Y>
< enter value >
< enter value >
< enter assigned value >
<<cr> or $>
< enter value >
<ATT>
< enter LEN to which LTID will be attached >
7
Issue 1
April 1999
H-22