Lucent Technologies MERLIN LEGEND Release 7.0 System Planning Manual page 235

MERLIN LEGEND Communications System Release 7.0
System Planning 555-670-112
4 Features
Group-Assigned Features
5. To designate a telephone to receive message-waiting indications for the
group, do either of the following under the Message-Waiting Receiver
heading on Form 7d (page 2):
6. Under the First Calls-in-Queue Alarm Threshold heading, do either of the
following:
7. Under the Second Calls-in-Queue Alarm Threshold heading, do either of
the following:
Under the Third Calls-in-Queue Alarm Threshold heading, do either of the
8.
following:
NOTE:
As a rule, the Delay Interval should never be set less than
the length (in seconds) of the secondary announcement.
Ideally, the Delay Interval should be a multiple of the
secondary announcement's length, based on the anticipated
number of calls in the queue. For example, if the secondary
announcement length is 10 seconds and five calls are
expected to be in the queue during busy times, then the
Delay Interval should be 50 seconds. For more information
on optimizing the settings for announcements, see the
Feature Reference .
— If you want the secondary announcement to repeat
continuously after the Announcement Delay Interval, then
check the Yes box next to Repeat Announcement. Otherwise
check the No box.
To assign no receiver, check the No box.
To assign a receiver, check the second box and write the extension
number of the message-waiting receiver (see Form 2a).
To keep the factory setting, check the 1 Call box.
To change the factory-set number of calls allowed in the queue
before members are notified with a flashing LED, check the second
box and write the number of calls (up to 99) in the space provided.
To keep the factory setting, check the 1 Call box.
To change the factory-set number of calls allowed in the queue
before members are notified with a winking LED, check the second
box and write the number of calls (up to 99) in the space provided.
To keep the factory setting, check the 1 Call box.
To change the factory-set number of calls allowed in the queue
before members are notified with a steady LED, check the second
box and write the number of calls (up to 99) in the space provided.
Issue 1
April 1999
4-37