Transfer Options - Lucent Technologies MERLIN LEGEND Release 7.0 System Planning Manual

MERLIN LEGEND Communications System Release 7.0
System Planning 555-670-112
4 Features
System Features
9c, Night Service: Time Set
10a, Label Form: Posted Message
10b, System Speed Dial

Transfer Options

This section contains instructions for setting the following Transfer feature options
to allow users to transfer outside or inside calls to another telephone:
Transfer Return Interval
One-Touch Transfer
Transfer Audible
Type of Transfer
NOTES:
Planning Form Instructions
1. Under the Return Time Interval heading in the Transfer Options section of
Form 8a, do one of the following:
Transfer features, and any other feature that requires more than one SA
button, can be disabled on Single-line telephones by removing all but
one SA button through centralized programming. Refer to Form 4f,
Tip/Ring Equipment.
If customers with CTI applications will frequently use the Conference
feature, set the system Transfer Type to Ring and not Voice. This will
minimize the possibility of broadcasting a conference over an
unattended speakerphone.
If the DLC operator uses the DSS to transfer calls across a private
network, the operator may want to use manual completion to avoid
transfer without return to busy. It you subscribe to ANI or ICLID and
automatic completion is selected, the ANI and ICLID information will be
sent but calls will not return on busy.
To keep the factory setting, check the 4 Rings box.
To indicate no return for transferred calls, check the 0 Rings box.
To change the factory-set number of rings, check the third box and
write the number of rings (1–9) in the space provided.
4
Issue 1
April 1999
4-41
4