Environmental Specifications - Lucent Technologies MERLIN LEGEND Release 7.0 System Planning Manual

MERLIN LEGEND Communications System Release 7.0
System Planning 555-670-112
1 Before You Begin
Requirements for Supporting CTI Applications
If the MERLIN LEGEND Communications System has only one MLX
extension module, you will also need System Programming and
Maintenance (SPM) software, Version 5.15 or later, to program your CTI
link.
One extension port on an MLX module is used for the link. Select from
ports 2, 3, 4, 6, 7, or 8 on an 008 MLX, 408 GS/LS-MLX, or 408 GS/LS-ID-
MLX module. In Release 7.0 and later systems, you can also select ports
2, 3, 4, 6, 7, 8, 10, 11, 12, 14, 15, or 16 on an 016 MLX module. The CTI
link port cannot be the potential operator port or the console programming
port.
For a NetWare 3.12 installation, ensure that NWSNUT.NLM, Version 4.11
or later, and TUI.NLM, Version 1.04 or later, is obtained from Novell and
installed in the SYS:\SYSTEM directory.
For a Windows NT installation, the required .DLLs and drivers will be
provided on a CD-ROM.
For more information on setting up the system, see the MERLIN LEGEND
Communications System Network Manager's Guide .

Environmental Specifications

If the Telephony Server platform and the MERLIN LEGEND Communications
System are to share an equipment room, the room's environment (temperature,
humidity, contaminants, EMI, AC power and grounding) must meet the more
demanding set of environmental specifications for the two units. Refer to the
specifications for each hardware platform for details.
— If no "U" appears after the module name in the System Inventory
screens, check for the proper Firmware Vintage:
•
008-MLX—28 or later, but not 29
•
408 GS/LS-MLX—28 or later, but not 29
•
408 GS/LS-ID-MLX—28 or later, but not 29
NOTE:
If you have Version 29, replace the module with an appropriate
version or, for a replacement card, call the TSO at: 1-800-628-2888.
NOTE:
To obtain these NLMs from Novell, access either the Novell web site
(http:\\www.novell.com) or the Novell FTP site (ftp.novell.com). First
download IPXRT4.EXE and follow the directions in the associated
readme file. Then, download NWSNUT.NLM and TUI.NLM.
1
Issue 1
April 1999
1-9