Unit Load Worksheet - Lucent Technologies MERLIN LEGEND Release 7.0 System Planning Manual

MERLIN LEGEND Communications System Release 7.0
System Planning 555-670-112
F Unit Load Calculation

Unit Load Worksheet

Unit Load Worksheet
1. Number of modules in carrier (excluding power supply and
processor):
If fewer than 5, no further calculation is required.
If 5 or 6, continue to Step 2.
2. Key or Behind Switch mode only:
Indicate the configuration of lines; then go to Step 5.
3. Hybrid/PBX mode only:
Do all modules in the carrier have MLX and/or
analog multiline telephone jacks?
If no, no further calculation is required.
If yes, continue to Step 4.
4. Hybrid/PBX mode only:
Calculate the total number of MLX and analog multiline
telephones.
Number of MLX-20L telephones connected to modules in
the carrier:
Number of MLX-28D telephones connected to modules in
the carrier:
Number of 34-button analog multiline telephones connected
to modules in the carrier:
Total of MLX-20L, MLX-28D, and 34-button analog
telephones:
If the total is less than 45, no further calculation
is required.
If the total is 45 or more, continue to Step 5.
5. Calculate the estimated unit loads by using the following table.
7
____________
Key
Modified
Yes
No
____________
____________
____________
____________
Issue 1
April 1999
F-3