Cover Ring Delay - Lucent Technologies MERLIN LEGEND Release 7.0 System Planning Manual

MERLIN LEGEND Communications System Release 7.0
System Planning 555-670-112
4 Features
Telephone and Extension Features

Cover Ring Delay

Beginning with Release 4.1, the following ring delay options can be programmed
for extensions:
The Group Coverage Ring Delay is programmed on individual sender
extensions and replaces the Coverage Delay Interval programmed on a
systemwide basis in previous releases.
When used in conjunction with Secondary Cover buttons, consider the
following when setting the value:
The Primary Cover Ring Delay and Secondary Cover Ring Delay are
programmed on individual sender extensions and replace the Delay Ring
Interval programmed on a systemwide basis.
Forms Needed
4b, Analog Multiline Telephone
4d, MLX Telephone
4e, MFM Adjunct: MLX Telephone
4f, Tip/Ring Equipment
4h, ETR Telephone
4j, MLS Telephone
5a, Direct-Line Console (DLC): Analog
5b, Direct-Line Console (DLC): Digital
5c, MFM Adjunct: DLC
7c, Group Coverage
Planning Form Instructions
1. After assigning Individual Coverage for each receiver telephone, locate the
appropriate form for each sender telephone (Form 4b, 4d, 4f, 4h, 4j, 5a, or
5b).
2. Under the Primary Cover Ring Delay heading, do one of the following:
— When secondary cover buttons are programmed for a sender, set
the value such that when the Group Coverage Ring Delay is added
to the Primary Cover Ring Delay, the result is greater than the
Secondary Ring Delay plus two rings (the fixed Secondary Cover
Delay Interval).
To keep the factory-set delay, check the 2 rings box.
To change the factory-set delay, check the second box and write the
number of rings (1–6) in the space provided.
4
Issue 1
April 1999
4-13
4
4