Labeling - Lucent Technologies MERLIN LEGEND Release 7.0 System Planning Manual

MERLIN LEGEND Communications System Release 7.0
System Planning 555-670-112
4 Features
System Features
Night Service with Coverage Control
As of Release 4.1, Night Service Coverage Control automatically controls the
status of programmed VMS Coverage Off buttons.
When the Coverage Control option is enabled, a transition into Night Service
(either by pressing a Night Service button or automatically by the Time Set option)
automatically deactivates the VMS Coverage Off (Release 2.0 or later) buttons
(LED is off) and allows outside calls to go to VMS Coverage at night. When the
system is taken out of Night Service (either by pressing a Night Service button or
automatically by the Time Set option), programmed VMS Coverage Off buttons
are activated (LED is on) and outside calls are prevented from going to VMS
Coverage during the day.
NOTE:
Private network calls act like outside calls and do not go to voice mail when
VMS Coverage Off is activated.
When the Coverage control option is disabled, Night Service status has no effect
on programmed VMS Coverage Off buttons.
Planning Form Instructions
In the Coverage Control section of Form 9c, Night Service: Options, do either of
the following:
To keep the factory-setting of disabled, check the Disabled box.
To change the factory-setting and enable the Coverage Control option,
check the Enabled box.

Labeling

Labeling enhances the capability of display telephones used with the system.
The following types of labels appear on display telephones:
Extensions and calling groups
Posted Messages
System Directory/System Speed Dial
Labels for extensions are described in
labels for lines/trunks are described in
calling groups are described earlier in this chapter.
This section contains instructions for assigning labels for Posted Message and
System Directory/System Speed Dial.
4
4
Chapter 2, ''Control Unit
Chapter 3, ''Lines/Trunks," and labels for
Issue 1
April 1999
4-56
4
Configuration,"