Lucent Technologies MERLIN LEGEND Release 7.0 System Planning Manual page 52

MERLIN LEGEND Communications System Release 7.0
System Planning 555-670-112
Prior Releases: Features and Enhancements
Release 2.1 Enhancements (August 1994)
Group Videoconferencing
Group videoconferencing is supported over DS1 (Digital Signal Level 1) facilities
with PRI. (Videoconferencing has been available since Release 2.0.)
Release 2.1 Enhancements
(August 1994)
Refer to Release 2.1 Notes for detailed descriptions of Release 2.1
enhancements. Release 2.1 includes all Release 2.0 functionality plus the
enhancements listed below.
Operational
System operational enhancements include the following:
When a call is forwarded to a multiline telephone that has an
DSS button programmed for the forwarding telephone, the green light next
to the Auto Dial or DSS button for the forwarding telephone does not flash.
People answering calls received on Cover buttons are allowed to generate
touch tones if their telephones are not outward- or toll-restricted.
Calls received on personal lines with Do Not Disturb on go immediately to
coverage instead of waiting for the coverage delay interval.
A call put on hold at a Cover button can be added to a conference by
someone who has a personal line for the call.
A call put on hold at a Cover button can be picked up by any person who
has a personal line for the call.
Calls that have been put on hold at a Cover, SA, Shared SA, or Pool button
can be picked up by a person who has a personal line button for the call.
An inside call on hold at an SA button can be picked up and transferred by
any person with a Shared SA button corresponding to the button with the
held call.
Calls that are on hold awaiting transfer can be picked up by any user who
has a personal line for the call.
Beginning with Integrated Solution III Version 1.2, the automatic
reconciliation program that was run automatically at 3:00 a.m. is disabled
and can be invoked manually from the User Maintenance menu.
If an extension is programmed for Forced Account Code Entry, account
codes do not have to be entered when using a programmed Loudspeaker
Paging button. In addition, an SMDR record is not generated for calls made
to paging ports.
0
0
0
Issue 1
April 1999
lii
or
Auto Dial