Obtain Form 6F, Disallowed Lists And, As Appropriate, The Form(S) For Individual Telephones: Forms 4B, 4D, 4E, 4F, 5A, 5B, Or 5C; If Necessary, Read "Allowed/Disallowed Lists" In The Feature Reference For Detailed Information About This Feature; Plan Changes Using The Planning Guidelines Above; Record The New Values On The Form(S); Open The System Programming Menu From The Console Or A Pc With Spm - Lucent Technologies MERLIN LEGEND System Manager's Manual

MERLIN LEGEND Communications System Release 5.0
System Manager's Guide 555-650-118
6 Managing the System

Changing Group Coverage Assignments

Task List: Assigning
Disallowed Lists to Extensions
o
Obtain Form 6f, Disallowed Lists and, as appropriate, the form(s) for
individual telephones: Forms 4b, 4d, 4e, 4f, 5a, 5b, or 5c.
o
If necessary, read "Allowed/Disallowed Lists" in the Feature Reference for
detailed information about this feature.
o
Plan changes using the planning guidelines above; record the new values
on the form(s).
o

Open the System Programming menu from the console or a PC with SPM.

o
Program the change(s), following the instructions for "Assign Disallowed
Lists to Telephones" in the "System Features" section of System
Programming , Chapter 3, or the summary programming instructions below.
o
When you have finished, file the form(s) with the rest of the planning forms.
!
Programming Instructions

Console Procedure

PC Procedure

Changing Group
Coverage Assignments
Use this procedure to assign or remove an extension from a coverage group.
NOTE:
In Release 4.1 and later systems, you can change, on an
extension-by-extension basis, the number of rings at a sender's extension
before a call is sent to Group Coverage receivers. For programming
information, see Chapter 3, "Common Administrative Procedures," in
System Programming and
6-50
SECURITYlALERT:
In Release 3.1 and later systems, Disallowed List number 7 is
automatically assigned to voice messaging system ports. To help
guard against toll fraud, assign this list to other extensions. For more
information, see the section above, "Changing Disallowed Lists."
Tables
no.
Enter
$
! !
.
6
6
Dial list no.
DisallowTo
Exit Exit
Type list no.

6
''Changing Coverage Delay Options'' on page
Issue 1
June 1997
Page 6-76
Dial ext.
Enter
Type ext. no.