Lucent Technologies MERLIN LEGEND Release 7.0 System Planning Manual page 110

MERLIN LEGEND Communications System Release 7.0
System Planning 555-670-112
2 Control Unit Configuration
Numbering the System
Planning Form Instructions
Use the floor plan and Equipment List (if available) to verify the location of any
video stations and all remaining MLX telephones and adjuncts connected to them.
1. On Form 2a, mark the extension jack assignments for the video stations
and the remaining MLX telephones:
a.
b.
c.
2. Using the information from Form 2a, mark the digital extension adjuncts
and video stations on Form 2b, System Numbering: Digital Adjuncts:
a.
b.
c.
d.
In the Jack Type column, make sure D is checked next to the logical
ID for each digital extension jack.
In the Person, Location, or Function column, identify each video
station or MLX telephone by the user's name, location, or function.
If an extension port will be a CTI link, Write
Location, or Function column and Label column, and put a check
mark in the CTI Link column. If this is a CTI link, skip to Step 3.
Select from ports 2, 3, 4, 6, 7, or 8 on an 008 MLX, 408 GS/LS-MLX,
or 408 GS/LS-ID-MLX module. In Release 7.0 and later systems,
you can also select ports 2, 3, 4, 6, 7, 8, 10, 11, 12, 14, 15, or 16 on
an 016 MLX module. The CTI link port cannot be the potential
operator port or the console programming port.
Do either of the following:
— If the jack does not have an adjunct connected, write
the Adjuncts column and skip to Step 3.
— If an adjunct is connected to the MLX telephone, proceed to
Step b.
If an adjunct is connected to the MLX telephone, enter the type of
adjunct (such as
If a digital data or video station will be connected to the jack, and the
equipment supports 2B Data (such as a videoconferencing system
using a BRI interface or a v.35 interface and an ISDN terminal
adapter that supports 2B Data), check the box in the 2B column.
NOTE:
Do not connect equipment that does not support 2B Data
(such as G4 FAX, or a videoconferencing system using a
v.35 interface and an ISDN terminal adapter that does not
support 2B Data) to an MLX jack configured as a 2B Data
port.
If a digital data or video system is connected to the jack, enter the
extension number in the MLX Telephone Ext. No. column.
) in the Adjuncts column.
Issue 1
April 1999
2-28
2
in the Person,
in