Lucent Technologies MERLIN LEGEND Release 7.0 System Planning Manual page 116

Hide thumbs Also See for MERLIN LEGEND Release 7.0:
Table of Contents

Advertisement

MERLIN LEGEND Communications System Release 7.0
System Planning 555-670-112
2
Control Unit Configuration
Numbering the System
NOTES:
Planning Form Instructions
On Form 2a, mark the extension jack assignments on the 012 (T/R), 016 (T/R),
MERLIN LEGEND Mail, and 008 OPT modules:
1.
In the Jack Type column, make sure T is checked next to the logical ID for
each tip/ring jack.
2.
In the Person, Location, or Function column, identify each T/R device by
the user's name or location and by type, such as single-line telephone, fax,
modem, or Delay Announcement Device.
3.
If the system includes optional applications, indicate the application on the
appropriate line in the Appl column, as follows:
On older versions of the 012 (T/R) module (apparatus codes 517C13–
517J13), only four tip/ring devices connected to the module can ring
simultaneously, regardless of how many jacks are open. Using more
than four devices can cause the devices to operate incorrectly.
The applications in
Table 2-9
modules manufactured for older MERLIN II systems. These applications
must be connected to 016 (T/R) modules or 012 (T/R) modules with
code 517C13 or higher labeled on the top of the module. Modules with
code 517A13 or 517B13 can be used to connect single-line telephones
only. They do not provide the disconnect signal required by answering
machines and applications. Do not use the 008 OPT module for
applications such as Enhanced Service Center, Messaging 2000, or
Intuity AUDIX.
When planning for CONVERSANT, refer to the documentation provided
with the application and contact the SDSC (dial 1-888-297-4700 and
follow the prompts to reach the CONVERSANT split) for information on
TTRs and ports.
For MERLIN LEGEND Mail, write
For Messaging 2000, write
For Intuity AUDIX, write
For Enhanced Service Center, write
For CONVERSANT, write
For MERLIN Mail Voice Messaging System, write
For Lucent Technologies Attendant, write
For AUDIX Voice Power IS II or IS III, write
For Integrated Voice Power Automated Attendant-IS II, write
.
For no applications, write
do not work properly with 012 (T/R)
.
.
.
.
.
.
Issue 1
April 1999
2-34
.
.
.
2

Advertisement

Table of Contents
loading

Table of Contents