Telephone And Extension Features - Lucent Technologies MERLIN LEGEND Release 7.0 System Planning Manual

MERLIN LEGEND Communications System Release 7.0
System Planning 555-670-112
4 Features

Telephone and Extension Features

Telephone and Extension Features
This section contains instructions for assigning some optional features to
extensions. These features may be used by both system operators and general
users:
Pool Dial-Out Code Restriction (Hybrid/PBX mode only)
Calling Restrictions
Forced Account Code Entry (not QCC)
Microphone Operation
Remote Call Forwarding (not QCC)
Fax Message-Waiting Receiver and Threshold
Trunk-to-Trunk Transfer
HotLine (single-line telephones only)
Service Observing (MLX only for Service Observer, any telephone for a
Service Observing group member except QCC or CTI link)
NOTES:
The system programmer and/or network administrator assigns these features.
There are additional extension features noted on the forms but not covered in this
book. Individuals normally program these features at their telephones, although
the system manager may also program these features using centralized
telephone programming. You may, however, want to complete the information on
the forms so they can serve as a complete summary of features for each
extension. Detailed information about these and all features is contained in the
Feature Reference . Instructions for using centralized telephone programming are
included in System Programming . For users who want to program features on
their own telephones, information and procedures are contained in the user and
operator guides.
You may choose the Extension Copy feature to create a template that can then be
copied to other similar extensions whose users require the same features. This
feature is also described later in this section.
The Service Observing button is administrable only via centralized
telephone programming.
Service Observing may be subject to federal, state, or local laws, rules,
or regulations or require the consent of one or both of the call parties.
You must check in your jurisdiction and comply with all applicable laws,
rules, and regulations before using this feature. Failure to comply may
result in severe penalties.
4
Issue 1
April 1999
4-2