Lucent Technologies MERLIN LEGEND Release 7.0 System Planning Manual page 49

MERLIN LEGEND Communications System Release 7.0
System Planning 555-670-112
Prior Releases: Features and Enhancements
Release 3.0 Enhancements (August 1994)
Pre-fabricated and pre-drilled backboard.
Installation, Upgrade Administration, and
Maintenance
These are the new MERLIN LEGEND Communications System capabilities:
SPM (Release 3.18) conversion of translations from Release 1.0, 1.1, 2.0,
and 2.1 to 3.0.
Remote operation at 1200/2400bps.
Advice and feedback administration screens for new Release 3.0
functionality.
PCMCIA Memory Card Interface (a Release 3.0 processor board required)
allowing:
Inter-digit dialing timer values are programmable.
Inspection of Lines/Trunks displays only those lines and trunks configured
on system rather than all 80 facilities.
Extensions and facilities in Maintenance Busy (both manual and automatic)
can be identified by the maintenance monitor.
User Features
Security
The Remote Access feature allows people at remote locations to enter the system
by dialing the number of a line or trunk designated for remote access. The system
can be programmed to require the remote user to dial a barrier code (a type of
password) after reaching the system. In earlier versions, the systemwide barrier
— 2500YMGL and 2500 MMGL (single-line desk telephones,
selectable positive disconnect).
— Picasso™ Still-Image telephone (for interactive display of still
images).
— Videophone 2500 single-line telephone with interactive video
display
— System software installation.
— System software upgrade.
— 800 GS/LS-ID port module firmware upgrade.
— Integrated backup and restore of translations.
— Automatic and manual options for backup and restore are available
on the system. Automatic backup can be scheduled weekly or daily
to fit the customer's needs.
0
0
0
Issue 1
April 1999
xlix