Coverage - Lucent Technologies MERLIN LEGEND Release 7.0 System Planning Manual

MERLIN LEGEND Communications System Release 7.0
System Planning 555-670-112
4 Features
Group-Assigned Features
Planning Form Instructions
1. Determine the number of paging groups needed.
2. For each group, write the name of the group, such as
ID space on Form 7b.
3. To change the factory-set extension numbers:
a.
b.
4. Write the extension number for each group member in the Ext. No. column
(see Form 2a).
5. Write each group member's name or location in the Person or Location
column (see Form 2a).

Coverage

Coverage allows calls to extensions (called senders ) to be covered by one or
more alternate extensions (called receivers ). Coverage can be individual or
group-assigned. This section contains instructions for both types. See
Restrictions''
Forms Needed
2a, System Numbering: Extension Jacks
4b, Analog Multiline Telephone
4d, MLX Telephone
4h, ETR Telephone
4j, MLS Telephone
5a, Direct-Line Console (DLC): Analog
5b, Direct-Line Console (DLC): Digital
6a, Optional Operator Features
8a, System Features
Write the new numbers in the Renumber to space.
On Form 2d, System Numbering: Special Renumbers, write the new
numbers in the Renumber to column of the Group Paging section of
that form.
earlier in this chapter for more information.
4
Issue 1
April 1999
4-26
4
, in the Group
''Calling
4