6-4
Installation and Maintenance Volume
Clear Commands
Use the CLEAR command to clear maintenance tables and reset all data to zero. A space is always
required between the C (for CLEAR) and the letter following. At the @ prompt, enter
C [name]
Command
C H
C I x y
C P
C NF
C R
C RT 1
Octel 200/300
S.4.1
Enter
Basic Definition
CLEAR HARDWARE
Clears the Hardware Error Table. Also opens the alarm relay, and turns OFF the
alarm LED.
CLEAR INTEGRATION
Clears the integration pegs, where x is the slot number and y is the unit number.
CLEAR PEG
Clears the Traffic Peg Count Table and the System Performance report.
CLEAR NETWORK FAILURES
Clears the Network Failure Table, which contains Protocol 2, Protocol 4, Protocol
5, and digital-network errors.
CLEAR REPORT
Gives a menu as follows, for the type of report to clear.
1.
SYSTEM PERFORMANCE (IN TRAFFIC PEGS) AND PORT STATISTICS.
2.
NETWORK TRAFFIC.
3.
USER MESSAGE, USER CALLING AND MAILBOX USAGE.
SELECT REPORT TO BE CLEARED. (1 − 3, EMPTY LINE = EXIT).
CLEAR ROUND TRIP
Clears the round-trip time for message waiting.
PB60019−01