Table of Contents
Advertisement
Quick Reference Guide
Command
Subject
Type
Miscellaneous
Port Status
Commands
(continued)
Restart
Restart
Integrations
APIC or NPIC
All other integrations SDBG xx yy zz
Network Time
Integration Cards
VCU
Write Protect Drive
PB60019−01
Command
Information
Displays current state of the ports.
PS x
x = non-zero for continuous (optional)
Restarts CPU. All active ports and the modem are
RESTA
dropped. The maintenance level password must be
entered before restart begins.
Restarts CPU. Reloads software from the hard disk.
RESTA 2
All active ports and modem are dropped.
Integration trace information is logged to the
message server's call-processing trace log file.
xx is the slot number and yy is either 7F to turn on
SDBUG xx 1 FF
yy
debug or 00 to turn off.
xx is the slot number, yy is the unit number, 11 is
the link number, and zz is either 7F to turn on
debug or 00 to turn off.
Displays the current system date and time. Used
TIME
only at the @ prompt.
Restarts integration cards and disrupts call
UPINTG
processing for approximately one to two minutes.
Connects to the VCU software and provides
VCU
detailed drive status, drive configuration, message
header information on installed hardware. From
this command you can enter the L DMAP
command to get more details.
Write protects a disk drive to prevent any new
WPDISK
messages from being created on that drive.
Octel 200/300
Maintenance Commands
Octel 200/300
S.4.1
Advertisement
Chapters
Table of Contents
