Table of Contents
Advertisement
Quick Reference Guide
Command
Subject
Type
Miscellaneous
Message Waiting
Lamps
Commands
(continued)
Names Directory
Password
Patch
Tone and DTMF
Port Mapping Status
Octel 200/300
S.4.1
Command
Information
Send commands to relight each message waiting
MWL RELITE
lamp that the Octel 200/300 has marked as ON.
Turns OFF lamp message waiting.
MWOFF x
x = mailbox number. The maximum number of
Prints status of the Dial-by-Name directory (Names
NAMESTAT
Directory). Also provides overall figures for
Dial-by-Name; that is, the number of local names
stored and the number of network names stored.
Sets the password.
PASS x y
x = password level
y = new password.
There are three password levels. Each password
may be a maximum of eight alphanumeric
characters, 0−9 and A−Z. All alpha characters must
be in capital letters.
Used to implement fixes to the message server
PAT x
software using the patch command. Refer to this
chapter for detailed information. x = the following:
Status = status and info for all current patches
Apply x = apply a patch to specified target
Apply All = applies all patches not yet applied
Remove x = removes patch from specified target
Remove All = removes all patches from server
Monitors and prints the tone and DTMF events.
PRT x
This is a real time command.
x = port number to monitor
Displays information about the allocation of system
PRTMAP
port numbers to ports configured in each slot.
Octel 200/300
Maintenance Commands
digits is eight. For ALL, enter A.
PB60019−01
Advertisement
Chapters
Table of Contents
