Avaya Octel 200 Installation And Maintenance Manual page 529

Hide thumbs Also See for Octel 200:

Table of Contents

The ST TR command shows the status of the trunk. This example shows normal trunk status.

−−−−− DS1A Signal Status −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−

Excess CRC Failures: NO

Excess FAS Errors:

Excess FEBE:

−−−−− Timeslot 16 Signaling Channel Status −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−

−−−−− CM State −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−

State: On−line

The ST CARD command shows the status of the card. This example shows normal card status. In this

example, the card is enabled to be the synchronization receiver of the master clock.

dtic>ST CARD

−−−−− Channel Status − ALL −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−

SEQUENCER PC:

CLOCK MASTER:

CLOCK ACTIVE:

The ST 1 command shows the port status for port 1 (channel 1). This example shows normal port status

for port 1. The port is idle and is transmitting and receiving the on-hook code.

−−−−− Channel 01 Status −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−

CHANNEL STATE:

SEQUENCER PC:

In CAS Frame

Octel 200/300

Chapters

Table of Contents