Table of Contents
Advertisement
6-24
Installation and Maintenance Volume
MESSAGE #
MESSAGE
PENDING QUERY
Network Mailbox Status for Analog Networking
Use the LIST NETWORK MAILBOX command to display information contained in the network mailbox
about a specific location, including the message numbers of all the messages in the network mailbox
waiting to be sent to that location. It also shows the current delay (in minutes), the error retry count, and
the retry limit.
L NET x
Where x is the location of the system the messages will be sent to. The command can also be abbreviated
as L N.
@L Net 6400
LOCATION FRAME NUMBER: 0005
DELAY:
ERRORS: 00000
LIMIT:
MESSAGE #
000E
0010
0012
Network Domain Status for Digital Networking
Use the LIST NETWORK DOMAIN command to list the messages pending for all domain locations
within a uniform-numbering-plan domain. The following example shows such a listing:
@L NET D
<ALL DOMAIN MESSAGES>
LOCATION FRAME NUMBER: 0002
MESSAGE #
2001
3002
MESSAGES PENDING QUERY:
4003
5002
6002
Octel 200/300
S.4.1
Lists the hexadecimal header number of all messages waiting to be sent. Refer to
the Message Status section in this chapter.
Beginning with S3.0, this can also be the message priority for Network Delivery
Schedules listed.
For Digital Networking, if the listing is for all domain locations, the header
numbers of all messages in the domain waiting to be sent are listed. If the listing is
for a particular domain location, the header numbers of messages waiting to be sent
to that particular domain location are listed.
Domain messages could be delayed in the predelivery processing and might not
show up in the list of messages pending for a specific location. These messages
appear under this heading.
Enter
00000 MIN.
00010
PB60019−01
Advertisement
Chapters
Table of Contents
