Avaya Octel 200 Installation And Maintenance Manual page 298

6-56 Installation and Maintenance Volume
73
74
75
76
Coordinate the following application-delay indexes for cadence recognition. Refer to Table 6-3.
Set index 49 to a value equal to the largest value for any of the following delay indexes: 53, 61, 63,
-
69, or 71.
Set index 50 to a value less than the value for any of the following delay indexes: 54, 62, 64, 70, or 74.
-
Set index 51 to a value equal to the largest value for any of the following delay indexes: 55, 65, 67,
-
71, or 75.
Set index 52 to a value less than the value for any of the following delay indexes: 56, 66, 68, 72, or 76.
-
Table 6-3 Application Delays for Cadence Recognition, for Determining Tone On/Tone Off
Single Interrupt Ringback
Max/Min Acceptable Tone Ranges
Double Interrupt Ringback, long periods
Double Interrupt Ringback, short periods
Slow Busy
Fast Busy
Octel 200/300 S.4.1
FAST BUSY MAXIMUM TONE ON PERIOD
The longest delay that a TONE ON can be to qualify as a fast-busy tone.
Use — The message server uses this delay to determine whether the tone cadences that it is
monitoring is a fast-busy tone. If the TONE ON is longer than this delay, the message server
assumes that it is not a fast-busy tone.
FAST BUSY MINIMUM TONE ON PERIOD
The shortest delay that a TONE ON can be to qualify as a fast-busy tone.
Use — The message server uses this delay to determine whether the tone cadences that it is
monitoring is a fast-busy tone. If the TONE ON is shorter than this delay, the message server
assumes that it is not a fast-busy tone.
FAST BUSY MAXIMUM TONE OFF PERIOD
The longest delay that a TONE OFF can be to qualify as a fast-busy tone.
Use — The message server uses this delay to determine whether the tone cadences that it is
monitoring is a fast-busy tone. If the TONE OFF is longer than this delay, the message server
assumes that it is not a fast-busy tone.
FAST BUSY MINIMUM TONE OFF PERIOD
The shortest delay that a TONE OFF can be to qualify as a fast-busy tone.
Use — The message server uses this delay to determine whether the tone cadences that it is
monitoring is a fast-busy tone. If the TONE OFF is shorter than this delay, the message server
assumes that it is not a fast-busy tone.
TONE EVENT Maximum Minimum
Tone On Tone On
Index 53 Index 54
Index 49 Index 50
Index 61 Index 62
Index 63 Index 64
Index 69 Index 70
Index 73 Index 74
Maximum Minimum
Tone Off Tone Off
Index 55 Index 56
Index 51 Index 52
Index 65 Index 66
Index 67 Index 68
Index 71 Index 72
Index 75 Index 76
PB60019−01