Avaya Octel 200 Installation And Maintenance Manual page 91

Hide thumbs Also See for Octel 200:
Table of Contents

Advertisement

Subsystem Configurations
Direct Access Card (DAC)
New Zealand, Australia
Direct Access Card (DAC)
Digital Trunk Interface
Card-E1 (DTIC-E1)
Fax Application Processor
(Fax card)
LAN Card
Works for Serenade
ACP card
Telemarketing Line Card
(TLC)
United Kingdom
Telemarketing Line Card
Netherlands Telemarketing
Line Card
New Zealand, Australia
Telemarketing Line Card
PB60019−01
Table 2-3 Octel 200/300 Subsystems (continued)
Part Number
300-6027-001
300-6027-011
300-6048-003
300-6037-002
300-6037-003
300-6049-001
300-6019-002
300-6032-003
300-6032-004
300-6032-010
300-6032-012
Description
4-port, two-wire, loopstart telephone line
interface card. This card allows direct
connection of incoming DID or outgoing PBX
trunks.
4-port, two-wire, loopstart telephone line
interface card. This card allows direct
connection of incoming DID or outgoing PBX
trunks.
A per-port integration card that offers 30 COD
ports (referred to as channels) and works in
conjunction with the DPNSS, Euro-ISDN, and
QSIG integrations.
4-channel fax processor supports communication
with CCITT Group 3 fax machines and operates
at transmission rates of up to 9600 baud.
8-channel fax processor supports communication
with CCITT Group 3 fax machines and operates
at transmission rates of up to 9600 baud.
Used for Digital Networking, LAN Backup and
Restore, Telnet terminal access and connection
to the OctelAccess server. Interfaces with the
Octel 200/300 via a 10BaseT Ethernet interface.
Processor for Works for Serenade flow control
language. Includes host interface and ACP SCSI
disk drive control.
8-port, two-wire, loopstart telephone line
interface card. Octel 200/300 allows recording
by the first port of a TLC only if the TLC is in
slot 1.
8-port, two-wire, loopstart telephone line
interface card. Octel 200/300 allows recording
by the first port of a TLC only if the TLC is in
slot 1.
8-port, two-wire, loopstart telephone line
interface card. Octel 200/300 allows recording
by the first port of a TLC only if the TLC is in
slot 1.
8-port, two-wire, loopstart telephone line
interface card. Octel 200/300 allows recording
by the first port of a TLC only if the TLC is in
slot 1.
Hardware
2-19
Octel 200/300
S.4.1

Advertisement

Table of Contents
loading

Table of Contents