Hardware Errors - Avaya Octel 200 Installation And Maintenance Manual

Hide thumbs Also See for Octel 200:

Table of Contents

HARDWARE ERRORS

The Octel 200/300 logs each hardware error, along with its date, time, and type, in the Hardware Error

Table. This section explains how to read and interpret the information in the Hardware Error Table. It

also suggests some probable causes and remedies.

The command LIST HARDWARE is used to list the Hardware Error Table. From the @ prompt, enter

The command CLEAR HARDWARE is used to clear the Hardware Error Table. From the @ prompt,

For some hardware errors it may be necessary to translate the error bits into the error code. To

display which bits are set in a HEXadecimal number (max 16 bits), from the @ prompt, enter

where x is a hexadecimal number.

An example to see which bits are set in the hex number 1234:

@BITTST 1234

BIT 12 IS SET

Hardware Error Table example and field description:

THU MM/DD 22:29:56

CLEARED: 08/26 11:02

TYPE SLOT CHNL PRIO DATE

TYPE. Range 1−nn. Indicates which hardware assembly detected an error or failed to perform a

function. See Table 8-2.

SLOT. Where applicable, shows slot number in which the PCA was installed when the error was

CHNL. Indicates the number of the failed channel.

For Error #24 only,

CHNL 1 refers to unit 1

CHNL 2 refers to unit 2

System Errors and Traffic Pegs

Octel 200/300

Table of Contents