Avaya Octel 200 Installation And Maintenance Manual page 630

12-42 Installation and Maintenance Volume
DSKMAP
The DSKMAP utility displays the last known status of all drives as recorded by the software in the Octel 200/300.
DSKMAP can be run from the hard disk or from the software disk. An example follows.
@DSKMAP
SLOT
+−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−+
SHELF B|
|
+−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−+
SLOT:
+−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−+
SHELF C| Voice 1
| ID: V1 ACTIVE |
+−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−+
ID is the status of a drive and can be any of the following:
Status
ACTIVE
VALID
INVALID
UNKNOWN
ILLEGAL
ERROR
EMPTY
.
OCC MISMATCH on the screen indicates that the Option Control Chip (OCC) data on the system disk(s) does
not match the OCC data of the system EEPROM. Proper procedures should be followed. Check the Hardware
Error Table to see if the OCC is faulty.
.
ID MISMATCH on the screen indicates that the drive has previously been installed in a different drive slot. It
must be removed and installed in the correct slot, or a Restore procedure must be performed.
DSKTST
The DSKTST utility tests the drive slot specified, updates the last known status record of the software, and displays
the status. DSKTST can be run from the hard disk or from the software disk. An example of the screen and an
explanation of the entries follow.
@DSKTST C1
CURRENT STATUS
Slot Type
−−−−−−−−−−−−−−−−−−−−−−−−−−−−
C1 Voice1
Octel 200/300 S.4.1
1 2
| System 1
| ID:S1 ACTIVE
1 2
| Voice 2
ID: EMPTY
Explanation
Drive is valid and currently operating.
Drive is approved for use, but requires rebuild to become active.
Drive configuration is not valid.
Drive configuration is valid, but does not match the rest of the system.
Drive is not an Octel 200/300 drive.
Drive is, or is considered to be, dead.
Drive slot is, or appears to be, empty.
ID Status
−− EMPTY Not Cfgd
3
| System 2 |
| ID:−− EMPTY | ID:−− EMPTY
3
| Voice 3 |
| ID: EMPTY | ID: EMPTy
4
Voice 1 |
|
4
Voice 4 |
|
PB60019−01