Avaya Octel 200 Installation And Maintenance Manual page 632

12-44 Installation and Maintenance Volume
DISKO
The DISKO utility, available when the Octel 200/300 is booted from floppy software using the Update disks,
prepares the message server for
Adding a disk
-
Removing a disk
-
Replacing a disk
-
Restoring system
-
Upgrading languages
-
Copying a disk (3.0)
-
.
DISKO prepares the message server for software upgrades. Option 6, UPGRADE SYSTEM, is used only for
upgrades. The instructions for upgrades are not covered in this manual. Support Notes that accompany the
upgrade disks detail the procedure to follow.
.
DISKO allows drives to be copied. Option 7, DISK COPY, is used only when a drive is failing and needs to
be replaced or to create a backup before performing an upgrade.
DISKO is accessible only after booting the Octel 200/300 from the software disks. It cannot be run from the hard
disk.
@disko
CURRENT STATUS
Slot Type
−−−−−−−−−−−−−−−−−−−−−−−−−−−−
B3 System1
B4 System2
C1 Voice1
C2 Voice2
C3 Voice3
C4 Voice4
DISK OPTIONS
1. ADD DISK
2. REMOVE DISK
3. REPLACE A DISK
4. RESTORE SYSTEM
5. UPGRADE LANGUAGES
6. UPGRADE SYSTEM
7. DISK COPY
Select option to be performed
(1−7 − Empty line = EXIT)
:7
Octel 200/300 S.4.1
ID Status
S1 ACTIVE Configured
−− EMPTY Not Cfgd
−− EMPTY Not Cfgd
−− EMPTY Not Cfgd
−− EMPTY Not Cfgd
−− EMPTY Not Cfgd
PB60019−01