Avaya Octel 200 Installation And Maintenance Manual page 631

Slot
-
Slot number for which status is given. The alphabetic character identifies the Octel 200/300 shelf; the numeric
character identifies the slot number.
Type
-
Identifies the type and sequence of the drive slots, as one of the following:
Octel 200
System 1
System 2
Voice 1
ID
-
Identifies the type and sequence of the disk drives, as previously recorded on the drive itself. When physically
installed in the correct slot, the drive appears as
Octel 200
S1
S2
V1
Status
-
Gives the status of the drive, as one of the following:
Active Valid
Invalid Unknown
Illegal Error
Empty
Refer to the status entry explanations in the DSKMAP section of this chapter.
Configured
-
Identifies the drive as one of the following:
Configured — Drive is within the number of drives currently configured.
-
Not Configured — Drive is not being utilized; its position is greater than the number of drives configured.
-
PB60019−01
Octel 300
System 1
System 2
Voice 1
Voice 2
Voice 3
Voice 4
Octel 300
S1
S2
V1
V2
V3
V4
Procedures 12-43
Octel 200/300 S.4.1