Hard Disk Procedures - Avaya Octel 200 Installation And Maintenance Manual

Hide thumbs Also See for Octel 200:

Table of Contents

HARD DISK PROCEDURES

This section describes the procedures for restoring, replacing, adding, removing, and copying a hard disk drive, and

for upgrading languages. This section also describes the hard disk drive utility programs used while performing the

hard disk procedures.

The following equipment is needed for the Hard Disk Procedures and should be assembled and verified prior to

Replacement hard disk drive(s) as needed

Software disks for the current release

System prompt disks for the current release

Verify that the software disks and system prompt disks are for the same software release.

A terminal and printer (or terminal with hardcopy capability) for communicating with the Octel 200/300 and

for obtaining a printed copy of all message server inputs and responses

The Hard Disk Procedures included in this section are

To add a drive to a message server. Refer to Hard Disk Add in this section.

To remove a drive from a multiple-drive message server. Refer to Hard Disk Remove in this section.

To replace a disk drive in a multiple-drive message server. Refer to Hard Disk Replace in this section.

To restore a message server to operation when system drive(s) must be replaced or the software is to be

updated. Refer to Hard Disk Restore in this section.

To copy a drive's contents to another drive. Refer to Hard Disk Copy in this section.

The utility programs used while performing the hard disk procedures are

Octel 200/300

Table of Contents