Character Attribute Commands; Character Code Commands - Avaya CS7000 Administrator's Manual

Chapter 10: Configuring the Avaya Notifications Subsystem
Table 60: Abox Fax Command
Abox
Usage
Meaning
Argument
Desc

Character Attribute Commands

The character attribute commands are: B, b, U, u, F, f
{B} Turn bold on. The text following will be bold.
●
{b} Turn bold off. The text following will not be bold.
●
{U} Underline on. The text following will be underlined.
●
{u} Underline off. The text following will not be underlined.
●
{F} Use large fonts. The text following will use large fonts.
●
{f} Use small fonts. The text following will use small fonts.
●

Character Code Commands

A numeric value representing the Modified ASCII 437 character set may be placed between
square brackets i.e. [204] etc the numbers are taken to be values over 200 and values below
200 will have 200 added to them.
186
CS7000 System Administrator Guide for Release 9.4
Description
{ABOX/Box type/ ID/ Alias control.}
Alias box.
Box type
Box ID
Alias control name.
An Alias Box acts as a BOX command with an
ALIAS control text formatted inside the box
area. Only one ID is allowed and the box is
terminated with a BEND command.
January 2006