Avaya Octel 200 Installation And Maintenance Manual page 337

Hide thumbs Also See for Octel 200:

Table of Contents

Transaction Types

To set specific transaction types, at the > prompt, enter the type of transaction and the status value. Refer

to Table 7-2 and Table 7-3 for the correct abbreviations, or use the LOG PF CDR command to display

the CDR log status and view the abbreviations. Refer to the Displaying CDR Type and Status

Configuration section.

A transaction type and a status value can be partially specified. When only the first letter (or two) is

entered, all types and values beginning with that letter are enabled. In the following example, only

transaction types beginning with CAL and status values beginning with B are set.

LOG FILTERS MODIFIED

Specify Filters to PRINT:

<"E"nable or "D"isable> <XA string or "ALL"> <ST string or "ALL">

Empty line when done. ESCape to abort.

To disable transaction and status values from the CDR log, use the same command:

Use the same procedure to disable transactions and status values, but add a D before specifying the filters

Specify Filters to MODIFY:

<"E"nable or "D"isable> <XA string or "ALL"> <ST string or "ALL">

Empty line when done. ESCape to abort.

LOG FILTERS MODIFIED

Log Commands 7-27

Octel 200/300

Chapters

Table of Contents