Removing The Hard Disk Drive - Avaya Octel 200 Installation And Maintenance Manual

Hide thumbs Also See for Octel 200:

Table of Contents

Removing the Hard Disk Drive

To remove the hard disk drive, use the following procedures:

1. Unlock and open the door of the cabinet.

2. Put on an antistatic wrist strap. Connect it to an unpainted portion of the cabinet.

3. Locate the drive assembly to be removed.

4. Use a flat-blade screwdriver to loosen the two captive screws securing the disk assembly to the

5. Gripping the front flange, pull the drive assembly out of the cabinet. Use one hand to support the

bottom of the drive when it clears the cabinet.

6. Carefully place the drive assembly nearby, to be reinstalled or shipped.

The hard disk drive assemblies are sensitive to rough handling. Be careful and handle them as

gently as possible.

Figure 9-16 Octel 200/300 Hard Disk Drive Assembly

Hard disk drive assemblies are sensitive to static

electricity. Do not attempt the following procedures

without wearing an antistatic wrist strap.

Hardware Replacement 9-25

Octel 200/300

Table of Contents