Avaya Octel 200 Installation And Maintenance Manual page 325

Message Activity
To print message activity currently in the CPT log using the LOG command, at the @ prompt enter:
LOG PR CPT
To list all messages or specify a specific message number, enter the filter MS. In this example, this
command displays all records for message 3000, from the beginning of the log to the end.
@LOG PR CPT
Specify Print Option(s):
"S"tart <time>, "E"nd <time>, "L"ine <length>, "p"age <length> "\"
"C"ontinuous
Filters: PR TY EV AU MB MS SL UN LI SO D1 D2 D3 D4 D5
>MS 3000
Integration Activity
To display integration activity using LOG, specify the type of integration to trace. Enter the filter TY x,
where x is the type of integration to trace. Enter TY INTG to show all integration activity.
INTG_C. Card-based integration record (MIC, RIC, ATTIC, SL1, M1)
-
INTG_CA. Card-based ANI integration record (MIC, RIC, ATTIC, SL1, M1)
-
INTG_R. RS-232C integration record
-
INTG_D. DTMF integration record
-
In addition to TY, you can also specify the following filters for integration:
SL Slot number for card integration
-
UN Unit number for card integration
-
LI Link number for card integration
-
SO Source of call (integration)
-
To display APlink activity using LOG, at the @ prompt enter:
LOG PR CPT
@LOG PR CPT
Specify Print Option(s):
"S"tart <time>, "E"nd <time>, "L"ine <length>, "p"age <length> "\"
"C"ontinuous
Filters: PR TY EV AU MB MS SL UN LI SO D1 D2 D3 D4 D5
>TY AP S 00 7 9 11 25
In this example, this command displays all Works for Serenade activity in the CPT log that occurred on
or after 11:25 a.m., July 9, 2000.
PB60019−01
Enter
Enter
Log Commands 7-15
Octel 200/300 S.4.1