Avaya Octel 200 Installation And Maintenance Manual page 378

7A-10 Installation and Maintenance Volume
Table 7A-2 EVENT and AUX Activities in Call Process Trace Log (continued)
TYPE EVENT
Column Column
Entry Entry
RBLD_P
ONT_ERR RCV_FAIL
RECORD
REMOVED
LAN
RCV
RECEIVED
RECRD_CALL Record call in progress.
ONT_IN, SAVE_GO
ONT_OUT
ONT_IN, SAVE_RQ
ONT_OUT
LAN
SEND
SENT
ONT_IN, SER_NUM
ONT_OUT
ONT_IN, SHDR_REQ
ONT_OUT
ONT_IN, SHDR_RSP
ONT_OUT
ONT_ERR SND_FAIL
Octel 200/300 S.4.1
DESCRIPTION
Logged an inconsistency during pass 3 of
the rebuild for the Names Directory.
.
The first 8 digits of the mailbox
number are printed in the
MBX/EXTN column.
Logged an OctelNet packet receive failure.
An attempt to receive/decode an OctelNet
packet failed. The reason for the failure is
indicated in the AUX column for
decryption failure, unscrambling failure,
checksum failure, timeout, or the remote
side hanging up. For other errors, the AUX
column is blank.
Start record message.
Message removed from mailbox or
location.
Received message.
Network message received.
Save go (DTMF digit 9). Sent by the base
server to the node after receiving the save
request from the node.
Save request (DTMF digit 8). Request by
the node to the base server after receiving
an end of message from the base.
Final message status result of STRTSND.
Message sent.
Serial number packet sent by the node to
the base server. The serial number (in hex)
is traced in the SOURCE column.
Session header request packet sent by the
base server to the node. The serial number
of the base is in the SOURCE column.
Session header response packet sent by the
node to the base server. The serial number
of the node is in the SOURCE column.
OctelNet packet send failure. An attempt to
prepare or send an OctelNet packet failed.
The reason for the failure is indicated in
the AUX column for encryption failure,
scrambling failure, checksum failure, or
the remote side hanging up. For other
errors, the AUX column is blank.
AUX
Column DESCRIPTION
Entry
BADNAMNM
USRINCON
Decryption failure
DECRPT
Unscrambling failure
UNSCRM
Checksum failure
CHKSUM
Timeout
TIMOUT
Remote side hanging up
HANGUP
Type of message is entered in AUX
column
SUCCESS
SUCCESS
Network connection was not successful or
CALLFAIL
was closed. Will retry to make connection.
The node is accepting the proposed
ACCEPT
connection.
The node is rejecting the proposed
REJECT
connection.
Encryption failure
ENCRPT
Scrambling failure
SCRMBL
Checksum failure
CHKSUM
Remote side hanging up
HANGUP
PB60019−01