Avaya Octel 200 Installation And Maintenance Manual page 233

Quick Reference Guide
Command Subject
Type
Clear Clear Hardware
Error Table
Commands
Integration Board
Network
Pegs
Reports
Message Waiting
Test
Digital Networking
Commands
LAN Status
SNMP Manager
System
Alarm Test
System Forwarding
PB60019−01
Command Information
Clears the Hardware Error Table.
C H
Clears the integration board pegs.
C I x y
x = slot number
y = unit number
Clears network failures.
C NF
Clears the pegs.
C P
Gives a menu for the type of report to clear.
C R
Clears the round−trip time for message waiting.
C RT 1
For Digital Networking, performs the lowest-level
CMD x PING y
"echo" test from the LAN at the local end to the
destination cabinet.
x = slot number in which the LAN card is installed
y = IP address of device to which text Ethernet
For Digital Networking, to get a quick indication of
T DNET
the general "health" of the configuration and
hardware at the local and remote cabinets.
Tests the mechanism for an Octel 200/300 to
T SNMP
communicate to an SNMP manager system.
Attempts to call number defined for alarm call.
TE A
Forwards all ports specified. Uses string from
TE C 1 x y
or System Parameter 45 —
CD x y z
FORWARD STRING
x = slot number
y = port number or first port in a range of ports
z = port number of the last port in a range of ports
Octel 200/300
Maintenance Commands
packet is sent
SYSTEM RELOAD
.
Octel 200/300 S.4.1