Table of Contents
Advertisement
Figure 12: An example of network connections for two dedicated networks
1
Host/server
2
Ethernet switch 1
3
Ethernet switch 2
4
Array
5
Data port eth3a on controller A
6
Management port eth0a on controller A
Advanced Configuration
In this configuration:
•
Management and data paths are on different subnets or networks
•
eth0 ports handle management traffic
•
eth1 through eth6 ports handle data traffic
The following example shows one possible way to connect the cabling for an advanced configuration. The data and management
paths are shown separately. Note that the subnet addresses in the data path illustration are just examples. Your settings will
differ. The advanced configuration uses the maximum number of data connections on the iSCSI network to obtain the best
availability and throughput.
In more advanced configurations, you can define your own network configuration to handle the desired I/O flow.
7
Data port eth3a on controller B
8
Management port eth0a on controller B
9
Data port connections
10
Management port connections
11
Management interface pair
12
Data interface pair
Documentation Feedback: doc-feedback-hpe-storage@hpe.com
Install the HPE Storage Array 30
Advertisement
Table of Contents
