Lldp Med Confignotification; Lldp Med Transmit-Tlv - NETGEAR ProSafe GSM7228PS Cli Manual

lldp med confignotification

Use this command to configure all the ports to send the topology change notification.
Default enabled
Format
lldp med confignotification
Mode Interface Config
no ldp med confignotification
Use this command to disable notifications.
Format
no lldp med confignotification
Mode Interface Config

lldp med transmit-tlv

Use this command to specify which optional Type Length Values (TLVs) in the LLDP MED set
will be transmitted in the Link Layer Discovery Protocol Data Units (LLDPDUs).
Default By default, the capabilities and network policy TLVs are included.
Format
lldp med transmit-tlv [capabilities] [ex-pd] [ex-pse] [inventory]
[location] [network-policy]
Mode Interface Config
Term Definition
capabilities Transmit the LLDP capabilities TLV.
ex-pd Transmit the LLDP extended PD TLV.
ex-pse Transmit the LLDP extended PSE TLV.
inventory Transmit the LLDP inventory TLV.
location Transmit the LLDP location TLV.
network-policy Transmit the LLDP network policy TLV.
Switching Commands
ProSafe 7200 Managed Switches CLI Manual, Software Version 8.0.3
v1.0, May 2010
3-169